The 5 best 3D Printer Interface & Driver Modules Review | Computers on

Manufacturer BIQU SainSmart Redrex Kuman WODE
Name BIQU Equipment A4988 Stepper StepStick Compatible Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs) (A4988-Green) SainSmart® 16-Channel 12V Relay Module for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot Redrex 5Pcs DRV8825 StepStick Stepper Motor Drivers for Reprap 3D Printer Electronics CNC Machine or Robotics Professional 3D printer CNC Kit for arduino , Kuman GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with heat sink + Nema 17 Stepper Motor KB02 2pcs Stepper Driver DRV8825 and heatsink RepRap Prusa Mendel 3D Printer
Rating 5 / 5 ( 1 Review ) 4.7 / 5 ( 3 Reviews )

no reviews

no reviews

5 / 5 ( 1 Review )
  • A4988 driver board widely used in 3D printers and ...
  • Simple step and direction control interface
  • Thermal protection, over-current protection, groun...
  • 12V 16-Channel Relay interface board, and each one...
  • Equiped with high-current relay, AC250V 10A ; DC30...
  • Standard interface that can be controlled directly...
  • Simple step and direction control interface
  • Over-temperature thermal shutdown, over-current sh...
  • Upgrade your Allegro A4988 drivers - more protecti...
  • Latest CH340G CNC Shield expansion board Version 3...
  • Kuman UNO R3 Board, MCU: ATmega328, USB interface:...
  • 4pcs DRV8825 Stepper Motor Driver with heat sinks
  • Six different step resolutions: full-step, half-st...
  • 45 V maximum supply voltage
  • Can interface directly with 3.3 V and 5 V systems
Delivery details In stock In stock In stock
Price £8.99
*Price last updated on 05.05.2017
*Price last updated on 05.05.2017
No price available
*Price last updated on 05.05.2017
*Price last updated on 05.05.2017
No price available
*Price last updated on 05.05.2017
Offer at Amazon*

3D Printer Interface & Driver Modules Review | Computers on

At 20bestsellers you get your fitting item in the category Computers. In the 3D Printer Interface & Driver Modules review you find the best products based on the Amazon bestsellers. In most cases you can’t do wrong purchasing one of the first articles in the list, because these are sorted by a various number of parameters. Criteria are customer feedback, price, number of sales, customer reviews, returns and many more.

It is necessary that you compare the descriptions of the 3D Printer Interface & Driver Modules whether they fit your needs or not. Read more information behind the links on Amazon to be sure that the product is just what you are searching for.

We only want you to be happy with the purchase! We hope that you find the best 3D Printer Interface & Driver Modules from our review.

The best 3D Printer Interface & Driver Modules review

Bestseller No. 1
VicTsing Mini DisplayPort Thunderbolt to HDMI/DVI/VGA Cable Adapter for Apple Macbook, Macbook Pro, iMac, Macbook Air, Mac Mini, Surface pro 1 2 3 4, Thinkpad Carbon X1 Series review
  • The adapter seamlessly connect Mac Book, Mac Book Pro, or Mac Book Air with a Mini display port to high definition displays.
  • You can connect the display to one of HDMI/DVI/VGA output ports.
  • Support audio output. When connecting the iMac (Late 2009) and Mac Book Pro (Mid 2010) to HDMI display, please set "Sound" on the dialog box of "System Preferences" to get audio output
  • Support HDMI/DVI/VGA output with the max resolution of [email protected], 225MHz/2.25Gbps per channel (6.75Gbps all channel), 12bit per channel (36bit all channel) deep color.
  • Note: Only one of the 3 outputs could be used at a time, you cannot use all of them simultaneously
Bestseller No. 2
PChero Hot Bed Power Expansion Board MOS Tube High Current Load Module for 3D Printer review
  • General add-on heated bed power expansion module, compatible with Anet A8 and most 3d printers. Effective to resolve the hot bed power is too large and the load current problems.
  • EQUIPPED with 32 bit high-speed ARM chip, the heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this PChero heat bed module is recommended.
  • OFFER PROTECTION- With this add-on module to your controller board, you can lead the maximum current up to 25A. If you need anything greater or equal to 15A this module is a must!
  • NOTE: Under the premise of normal cooling, it works stably under I(Max)=25A, the current must NOT exceed 25A while in the work process.
Bestseller No. 3
Aiskaer 5 Pcs A4988 Stepstick Stepper Motor Driver Module + Heat Sink for 3d Printer Reprap review
  • A4988 driver board widely used in 3D printers and small CNC machines
  • Simple step and direction control interface
  • Thermal protection, over-current protection, ground fault protection
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates
Bestseller No. 4
BIQU TL-Smoother kit addon module for pattern elimination motor filter clipping filter 3D printer motor drivers Controller(Pack of 3pcs) review
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers
  • The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver
  • You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper drivers and A4988/2 drivers
  • Lower vibration lower noise smoother result
Bestseller No. 5
HALJIA 3Pcs DRV8833 1.5A 2 Channel H Bridge DC Gear Motor Driver Module Board for 3D Printer Arduino review
  • The motor driver can control up to two DC motors at a constant current of 1.0A (4A peak).
  • Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
  • The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz.
  • Power supply voltage: VM = 2.7-10.8V
  • Output current: Iout=1.0A(average) / 4A (peak)
Bestseller No. 6
TMC2208 Stepper Motor Driver Module with Heat Sink for 3D Printer Part review
  • Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control
  • As stealthChop fine music technology is widely used in 3D printing, so these components are also designed to be compatible with existing 3D printer electronics, eliminating the need for costly redesign
  • Components have pulse/direction input, can be completely independent operation
  • The configuration is implemented via digital input
  • Can replace the original TMC2100 ,lower heat, especially for the 3D printing market
Bestseller No. 7
Buynew 10 PCS Male Straight Pneumatic 4mm M6 Ptfe Tube Push In Quick Connect Fitting PC4-M6 for Reprap 3D Printer Bowden Extruder review
  • PTFE Tubing OD: 4 mm
  • Thread: 6 mm
  • Miniuature push-in pneumatic fitting
  • Medium:Air & Water
  • Apply for:PU hose ,Nylon Pipe ect
Bestseller No. 8
T- Module Stepper Motor Driver Controller Board Ultra Silent with Heat Sink for Arduino 3D Printer(TMC2100 Pack of 4) review
  • TMC2100 modules adopt high quality chips which is ultra-quiet and ensures a stable performance.
  • They are very good choices for those users who have high requirement for the printer.
  • Come with heat sinks for better heat dissipation, and the best work current is 0.5A. You can add cooling fan if necessary.
  • These driver modules can be used to replace A4988, and the motor direction is opposite to that of 4988.
  • These are essential stepper motor driver module for 3D printers, CNC, engraving machines, etc.
Bestseller No. 9
Aiskaer 5 Pcs StepStick 4-layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988 review
  • DRV8825 driver board widely used in 3D printers and small CNC machines
  • It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
  • Simple step and direction control interface
  • Stepper Motor Driver (Header Pins Soldered) is a breakout board for DRV8825 microstepping bipolar stepper motor driver
  • Could be operated from 8.2V to 45V and can deliver up to approximately 1.5A per phase. It comes with 0.1"-pitch male header pins installed
SaleBestseller No. 10
Professional 3D Printer CNC Kit for Arduino, Kuman GRBL CNC + Ramps 1.4 Shield + UNO R3 Board with Mechanical Switch DRV8825 A4988 Stepper Motor Driver with Heat Sink + NEMA 17 Stepper Motor KB02 review
  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
  • Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable
  • 4pcs DRV8825 Stepper Motor Driver with heat sinks
  • 3pcs NEMA-17 Stepper Motor 84 (59 Ncm) 47mm Body 1.8 degree with mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12 pcs M3 Screws
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable

Latest 3D Printer Interface & Driver Modules

These are the most recent and interesting items we found on Amazon.

Last price update on 2017-11-14 / affiliate links / images from the Amazon Product Advertising API


Leave a Comment